DIY Lowel Ego Lights

Some of those who know me have been known to call me cheap…well I like to think i’m thrifty. Now is that such a bad thing? Certainly not when it comes to making your own photography accessories! Especially considering the price of some of the items out there. So in my “thriftyness” I was looking for a good solution for indoor photography lighting for my food and came across these Lowel EGO Lights which look great. Now I wasn’t so concerned with the price, as it was fairly reasonable for good photography lighting, my main concern was the fact that I live in Canada and I didn’t want to wait long to get these shipped. So off I went searching for Do-It-Yourself EGO lights and found several results and realize I could make these right away, not to mention they would be way cheaper as well! (Always a bonus for me).

valium online pharmacy

So here goes the Do- It-Yourself Guide (and for those who just prefer the ease of buying something, you can pick up a nice pair at below!)
xanax for sale buy xanax online no prescription buy tramadol without prescription buy ambien no prescription buy xanax online without prescription ambien online no prescription

Do-It-Yourself Lowel EGO Lights

buy tramadol online without prescription

xanax online without prescription


buy valium no prescription

From Canadian Tire: (can also be found at other homestores like Home Depot or Rona)

tramadol online without prescription

buy valium no prescription

From Michaels Craft Store

valium online no prescription


  • X-acto knife
  • Glue Gun
  • Ruler
soma online no prescription

Click through to view all of the steps:

Step 1

Outline a rectangle the size of your cross stitch mesh in the foam board and cut it out with the x-acto knife. I would recommend holding your ruler beside the line to help keep your knife in a straight line.

Step 2

Measure out the middle of your board and trace a circle around the edge of the socket onto your board and carefully cut it out with the x-acto knife.

Step 3

Once you have made your center hole cut, lightly cut one side of the foam board. Do not cut all the way through, as you will need the opposite side to hold together when you bend it.

Step 4

Place your cut board onto the foam board, so it forms a 90 degree angle and trace along the outer edge of the board.

Step 5

Once you have outlined everything, also make another line an inch from the first line. Once again make a light cut less than halfway through the foam board on the first lines you traced. From here you can bend the foam board up and glue the main board to the base plate. For extra support you can also glue the extra inch edge that you created to the main board.

Step 6

Now we can connect the light mechanism together. This is very simple, first take your lamp cord and slightly curve each wire:

Now insert the cord through the base (bottom half) of the light socket.

Once you have done this, grab the actual light socket which is in the center of socket and loosen each screw so you can slip the wire underneath and screw tight once they are in place. It may be marked differently depending on what supplies you purchase, but in this case, the ribbed wire of the lamp cord connects to the gold screw and the plain wire connect to the silver screw.

Now screw the entire socket together, insert it into the hole on your main foam board (you may need to make it slightly bigger), and then attach the twin socket adapter.

From here you can just screw the bulbs in and then move onto attaching the cross-stich mesh.

Step 6

For this step, just glue one side of the cross-stich mesh to on edge of the main board, once that has dried, curve it and glue the other side of the mesh to the opposite edge of the foam board.

For further diffusion you can attach a white sheet, parchment or tissue paper, or anything you can think of that may help diffuse some of the light.

Hope this tutorial helped and you can make some for yourself! Of course, if you aren’t feeling that thrifty, head over to amazon and pick up an actual pair of Lowel EGO lights!

Update: Here is how i’ve been using my “EGO lights”. I’ve set up a poster board to create an “infinite background” and place a white foam board on top of my lights to essentially create a lightbox, which helps illuminate the food even more!

Here is a picture of some beautifully lit apples taken using the set up above. The picture was taken at 11pm in complete darkness, so while natural light is always the best option, these are great when that isn’t option. The best part of using these lights is the ability to play around with the set up until you find what works best for you, giving you consistent shots every time!

Here I did some comparison shots:

Both look pretty good hey? The picture with natural light was taken around 1PM while the one with artificial light was taken with all the lights turned off, at 9 PM using the following set-up:

So after some testing out, you can get some really nice shots using only one light and a reflector, but having two lights does give you a little more versatility, especially when shooting something a little bit larger.

34 responses to “DIY Lowel Ego Lights

  1. Pingback: DIY Lowel Ego Lights « Baking in Saskatoon

  2. Pingback: how to…make a light box

  3. Pingback: Strawberry Gelato | A Culinary Journey With Chef Dennis

  4. Great project. I would try and hunt down some 5500k bulbs. 6500k bulbs are very blue and hard (for me) to look at. 5500k’s are hard to find, but they’re all over Amazon. My local home improvement store sells them at a higher price.

    Picture of the package.

  5. Very cool post! Thanks for sharing!

  6. Made one of these lights over the weekend… Works great so far, but I think two would be better. Right now I am using some white foam board on the other side to bounce the light.

  7. Pingback: Ahi Poke Tartare | Prescription for Hungry Foodies

Leave a Comment!